Skip to main content

3M™ 5316 5300 Motor Lead Pigtail Splice Kit, 5/8 kVAC, 8 to 4 AWG Feeder Cable, 10 to 4 AWG Motor Lead Conductor, 8 in L Splice, EPDM Rubber

Selected 3M™ 5316 5300 Motor Lead Pigtail Splice Kit, 5/8 kVAC, 8 to 4 AWG Feeder Cable, 10 to 4 AWG Motor Lead Conductor, 8 in L Splice, EPDM Rubber
3M™ 5316 5300 Motor Lead Pigtail Splice Kit, 5/8 kVAC, 8 to 4 AWG Feeder Cable, 10 to 4 AWG Motor Lead Conductor, 8 in L Splice, EPDM Rubber

Short Description

3M™ 5300 Series motor lead pigtail splice kit is perfect to use with copper compression and 2-hole lugs. This non-shielded splice kit is designed to splice wet/dry, motor lead cables to the incoming feeder cables. This kit is rated for 5/8 to 1 kV rated applications.

Features

  • Fast and simple installation
  • No torches or heat source required
  • No special tools required to install splice
  • THK walls to resist puncture and abrasion damage
  • High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress
  • Easy re-entry, can be used on cables with a rated operating temperature of 90 deg C and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 VAC and less cables sized 16 AWG to 500 kcmil
  • Suitable for use with 30000 Series copper compression lugs or other UL listed copper lugs
  • 365 V mil dielectric strength
  • 750% elongation
  • 1400 psi tensile strength
  • 1/2 in maximum bolt length
  • Polyethylene cable

Specification

Voltage Rating
5/8 kV
Conductor Size
8 to 4 AWG Feeder Cable, 10 to 4 AWG Motor Lead
Insulation Size
0.3 to 0.51 in OD
Number of Conductors
1
Dimensions
8 in L
Material
EPDM Rubber

Call it Something Else?