Skip to main content

Fluke® FLUKE-28II Digital Multimeter, 1000 VDC/VAC, 10 A, 50 MOhm Measuring, 1000 VAC/VDC, 10 A, 0.1 Ohm to 50 MOhm, Bar Graph/Backlight Display

Selected Fluke® FLUKE-28II Digital Multimeter, 1000 VDC/VAC, 10 A, 50 MOhm Measuring, 1000 VAC/VDC, 10 A, 0.1 Ohm to 50 MOhm, Bar Graph/Backlight Display
Fluke® FLUKE-28II Digital Multimeter, 1000 VDC/VAC, 10 A, 50 MOhm Measuring, 1000 VAC/VDC, 10 A, 0.1 Ohm to 50 MOhm, Bar Graph/Backlight Display

Documents

Short Description

Fluke 28 II digital multimeters define the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 deg C to +55 deg C (5 deg F to 131 deg F, -40 deg C for up to 20 minutes) and 95% humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 20 Series Multimeters are built to work in the toughest environments.

Features

  • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
  • New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
  • Designed to withstand 3 meter drop (with holster)
  • True rms AC voltage and current for accurate measurements on non-linear signals
  • Large display digits and 2 level bright white backlight for increased visibility, rubber holster
  • Reversible holster for added protection when not in use
  • Withstands hazardous 8,000 V spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
  • Long battery life (800 hrs)
  • Relative mode to remove test lead resistance from low ohms measurements
  • Auto and manual ranging for maximum flexibility, limited lifetime warranty
  • DC voltage range- 0.1 mV to 1000 V with accuracy +/- (0.05% + 1)
  • AC voltage range- 0.1 mV to 1000 V with accuracy of +/-(0.7 % + 4)
  • DC current range - 0.1 uA to 10 A with accuracy of +/-(0.2% + 4)
  • AC current range- 0.1 uA to 10 A with accuracy of +/- ( 1 % + 2)
  • Resistance range- 0.1 Ohm to 50 MOhm
  • Capacitance range 1 nF to 9999 uF
  • Frequency range 0.5 Hz to 199.99 kHz
  • 800 hours of battery life
  • 6000 count, update 4/sec (model 28 II also has 19,999 count in high-resolution mode), 33 segments, update 40/sec display

Specification

Frequency Rating
199.99 kHz
Measuring Range
1000 VDC/VAC, 10 A, 50 MOhm
Resistance
50 MOhm
Safety Rating
CAT IV 600 V, CAT III 1000 V
Temperature Rating
-328 to 1994 deg F
Voltage Rating
1000 VAC/VDC
Standard & Approvals
CE Certified, CSA Certified, MSHA Approved
Dimensions
2.5 in L x 3.93 in W x 7.8 in H
Accuracy
0.7 % +4 AC Voltage
Bandwidth
15 Hz - 20 kHz
Battery Type
3 AA Type
Capacitance
9999 uF
Display
Bar Graph/Backlight
Enclosure Type
Hard Plastic
Amperage Rating
10 A

Call it Something Else?